6 posts / 0 new
Last post
quadra-box's picture
ModeratorExperienced Participant
Posts: 8
Joined: Apr 23 2016 - 1:33pm
Will QB1, the compact, lightweight and great value case from QUADRA-BOX fit your quad?

QB1 is designed to fit the DJI Phantom 3 but is also designed to be easily customizable to a range of other similar sized quads. The crisp, easy to cut, layered foam design makes it super easy to modify and the results look great. So far, we have fitted the case the Phantom 4, Phantom 2 and Xiro Xplorer.

Tell us what 350 size quads you have and we'll tell you if QB1 will fit!!

Check out the videos for more on custom fitting QB1 for Phantom 4 and Xiro Xplorer.

 

QB1 and Phantom 2
QB1 and Phantom 3
QB1 and Xiro Xplorer
QB1 and Phantom 4
Jonathan's picture
ModeratorSeriously Addicted
Posts: 194
Joined: Jan 2 2016 - 12:08pm
Wow, I didn't expect to see

Wow, I didn't expect to see Xiro Xplorer on that list! There are a few others that are somewhat similar in dimensions, off the top of my head - Cheerson CX-20, Hubsan X4 Pro, and Syma X8C. Would be interesting to see if any of those can be made to fit. I'm sure customers who have some of these other models may have the same idea, and will see if they can hack/multi-purpose their QB1s. wink

Vertigo's picture
ModeratorSeriously Addicted
Posts: 211
Joined: Jan 2 2016 - 1:13pm
Autel Robotics X-Star. I bet

Autel Robotics X-Star. I bet that would be a direct fit with no modification.

https://www.autelrobotics.com/

quadra-box's picture
ModeratorExperienced Participant
Posts: 8
Joined: Apr 23 2016 - 1:33pm
Good recommendation!

Hi, thanks for that. This quad was not even on our radar and it does look like it will fit perfectly. All the dimensions are spot on.

quadra-box's picture
ModeratorExperienced Participant
Posts: 8
Joined: Apr 23 2016 - 1:33pm
Do you have any of these quads? Hubsan X4, Syma X8C, Autel Star

Thanks everyone for the recommendations. We've done some research and have come up with the following!!

Cheerson CX-20 - it's the right size, but the antenna ontop of the quad is likely out of spec for the case.
Hubsan X4 Pro - looks like a good fit. Perhaps one small mod for the gimbal.
Syma X8C - look like a good fit. Should go in without any mods.
Autel Robotics X-Star - looks like a great fit! Likely no modifications required.

Does anyone have either of these quads, or all three that will potentially fit?

If would be a great experiment to know for sure.

Happy flying everyone!

Rob
 

Vertigo's picture
ModeratorSeriously Addicted
Posts: 211
Joined: Jan 2 2016 - 1:13pm
quadra-box wrote:

quadra-box wrote:
Thanks everyone for the recommendations. We've done some research and have come up with the following!!
Cheerson CX-20 - it's the right size, but the antenna ontop of the quad is likely out of spec for the case.
Hubsan X4 Pro - looks like a good fit. Perhaps one small mod for the gimbal.
Syma X8C - look like a good fit. Should go in without any mods.
Autel Robotics X-Star - looks like a great fit! Likely no modifications required.
Does anyone have either of these quads, or all three that will potentially fit?
If would be a great experiment to know for sure.
Happy flying everyone!
Rob
 

Yeah the first time I saw across the Autel product, I had a feeling they're using the exact same shell that DJI uses...might even be from the same factory in Shenzhen!
The company is pretty new - located just outside Seattle, Washington. They're probably flying under the radar for most people still; if they're successful, I'm sure people will start talking about how they're compatible with phantom cases. If the company doesn't make it and goes under later this year, then probably not worth advertising compatibility with them anyway!